Assembly and Installation Instructions
Hanging your wind chime:
There are a number of safe ways to hang your chime. The best for a particular circumstance will depend on which chime size you're hanging and where it is you would like it to hang. In all cases, simply using some basic common sense is a great start. In many cases, hanging a chime properly is not a complicated matter. Some chime hanging basics are:
- Don't hang your chime on anything that is sharp or abrasive. Over time the cord will be cut or worn and will eventually break. For instance, instead of hanging the chime from an old rusty nail, take the time to get a carabiner or some other sort of metal ring. Hang the chime from the ring, then hang the ring from the nail.
- Consider the fact that the forces on the chime support will vary and will increase substantially during severe weather conditions. When planning the support for your chime, take the time to do it right by preparing for stormy conditions.
- Test the installation by giving a tug on the chime after hanging it to make sure it stays put. For the smaller chimes, a gentle downward pull will suffice; whereas for the larger, heavier chimes, a good solid downward test pull is a good idea. A good rule of thumb is to test the installation with a force that is between two and three times the weight of the chime.
- Be considerate of your tree. When hanging chimes from a tree limb, use a blanket or a piece of rubber to spread out the load on the limb. This will avoid cutting into the bark and damaging the tree. A section of an old bicycle tire works very well for this purpose.
- Use a deck hook as a safe and convenient way to hang the chimes from a deck railing.
- Use a wall bracket to hang the chime from a wall. If mounting the bracket on a brick, stone or masonry wall, use the proper inserts for the job.